News

  • 0
  • 0

Which is the best way to backfill a bathroom

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



The backfilling of the bathroom is a crucial part of any renovation. Backfilling is an essential part of bathroom renovations. It serves many purposes, including protecting the pipeline and stopping leakage. It also improves the thermal insulation capability of the room. In selecting bathroom materials, you should consider a number of factors depending on your specific situation. For example, take into account the performance and cost of backfill material as well the environmental impact.

There are five types of backfills available on the market: slags in general, carbon-slags backfills (also known as slags with carbon), ceramics backfills for overheads and foam cements backfills. Backfills are confusing.

Backfilling with slag can be cheaper, but because it is heavy and can cause the floor slab to crack easily, causing water to leak.

It is cheaper to use overhead backfill because you don't need as much material.

Since a few decades, foam cement backfilling has been popular. But does it come with any disadvantages?

For your information, here are five bathroom backfill materials with their advantages and disadvantages and some selection advice:

Building debris backfill

Advantages:

The advantages of slag backfill are its lower cost, ease of construction and certain thermal insulation properties.

Disadvantages:

Backfilling with construction waste will damage the waterproof layer and the pipeline due to its sharp edges.

Recommendation:

Has been eliminated. This is not a method that should be used. It will cost too much for a family to backfill with construction debris. To protect the waterproofing of the ground, first use fine sand, then red brick, to protect the pipeline. The backfill should be compacted in layers. Finally, mud-mortar to level the surface will provide good secondary drainage.

Carbon Dregs Backfill

Advantages:

Carbon slag as a backfill has many advantages, including its low cost, ease of construction, lightweight structure, good moisture absorption, and excellent moisture control.

Disadvantages:

Carbon dregs are not as stable, they can easily deform or fall off and are relatively flimsy. They also absorb moisture, which increases pressure on floor slabs.

Recommendation:

In recent years, carbon slag has rarely been chosen as a backfill in bathrooms due to its negatives.

Ceramic Backfill

Advantages:

Ceramic backfill has several advantages including high strength, good insulation and corrosion resistance.

Disadvantages:

Before pouring in the ceramic, use lightweight bricks for layered partition. Divide the bathroom into several squares. Fill the squares with the ceramic, then place a reinforcing mesh with a diameter around one centimetre. Finally, level with cement mortar.

Consider your family's budget in its entirety.

Overhead Backfill

Advantages:

Backfilling with overhead backfill has many advantages, including its simplicity, stability, inability to deform and easy fall-off.

Disadvantages:

The labour costs are higher for backfilling than other methods. The bottom drain is located overhead and will make the sound of running waters more noticeable.

It is important to carefully consider whether the disadvantages of the situation outweigh any advantages.

Foamed Cement Backfill

Advantages:

Foamed cement is an increasingly popular backfill. It is also safe and eco-friendly. Cement foaming agent is made of plant-based fats, which is a safe and environmental material.

Benefits include good heat conservation, light weight, high strength and corrosion resistance. The backfilling process is greatly accelerated and reduced in cost, as it can be filled seamlessly and with very little effort.

Foamed cement can be mixed with cement and used to fix the pipe. If not, the pipe will easily float.

Disadvantages:

It is best to find a builder that has worked with foam cement or look up construction tutorials.

Suggestion:

The majority of people backfill their bathrooms with foamed-cement. Its advantages are still quite obvious.

The five types of backfill for bathrooms all have advantages and disadvantages. In order to choose the right material for your bathroom backfill, you should consider a number of factors. You must always consider the environmental aspect when choosing bathroom backfill materials to ensure the decor of the bathroom is safe and sustainable.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

TRUNNANO is a reliable supplier for high purity 3D Printing Nickel Alloy IN718 Powder.…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

TRUNNANO is a reliable supplier of Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate.…