Risk aversion plunged on the positive news of the Russia-Ukraine talks. After several days of rising oil prices, the price of precious metals continued to fall. Domestic futures markets remain stable for the time being.

Back in international markets, WTI crude futures briefly dipped below $100 a barrel, while Brent crude hit its lowest intraday level in nearly two weeks. Spot gold briefly fell below $1,900 an ounce. Comex gold futures closed down 1.1 percent at $1,918.4 an ounce. Comex silver futures closed down 1.14 percent at $24.91 an ounce. "Recently, crude oil prices have been extremely sensitive to changes in geopolitical news." Traders believe that the current oil price is still in the broad impact, Ukraine will still be a premium in the case, although the market further decline, but should not be too pessimistic, it is recommended to wait and see for the time being. The Ukrainian premium is still there and there will be some volatility in the WS2 powder market.

Tungsten disulfide, as a new type of solid lubricating material, its chemical properties are relatively stable. It can adapt to a variety of extremely harsh conditions, to provide maximum wear resistance, rust, and corrosion protection. And it is environmentally friendly, is not toxic, and will not cause harm to human health. It can be widely used in the automotive industry.
 
Tungsten disulfide has a layered crystal structure. It has excellent lubricity, with a very low friction coefficient, the dynamic friction coefficient is 0.030, and the static friction coefficient is 0.070. It is coated on the surface of automobile parts, can greatly reduce wear, and bite, eliminate or reduce the friction, and wear caused by equipment maintenance, maintenance, and other problems, and improve the working efficiency and service life of automobile parts. 
 
When the engine is running, the temperature is very high, and the pistons are turning back and forth at a very high speed. Operating in such harsh conditions, pistons wear out faster.  Because the friction coefficient of tungsten disulfide is small, the parts used for high temperature or heavy load friction can also maintain a lubrication effect. At this point, it is coated on the surface of the piston, which will reduce wear, reduce temperature, and prolong the service life.



The piston ring is the least durable part of the engine. The piston ring rotates with the piston at high speed and is affected by the high temperature and high-pressure gas in the cylinder. The oil is particularly prone to deterioration at high temperatures, so its wear is very serious.  With tungsten disulfide, friction is reduced and it is possible to move with the piston at high speed, high pressure, high temperature, and extremely difficult lubrication conditions. 
 
The crankshaft is one of the most important parts of the engine, and its working state is also high-speed rotation, so it must be able to resist wear and fatigue. Journal surface is generally after high-frequency quenching or nitriding treatment, its surface coated with tungsten disulfide and fine grinding, and its wear resistance and fatigue strength will be greatly improved.
 
The universal joint, steering knuckle, spring steel bushing, front, and rear brake CAM bushing, are relatively difficult to be greased. In frequent operation, the lubricating oil will deteriorate and lose lubrication effect, and tungsten disulfide has excellent mechanical stability and thermal stability, which can well ensure that these parts enjoy lubrication effect and reduce wear.
 
Tungsten disulfide has excellent compatibility, water erosion resistance, and affinity with most paints, solvents, and fuels. It ensures that there is always a layer of lubrication on the surface of the bearings in the water pump and the silicone fan clutch as well as the helical gears that drive the distributor, so as to protect against rust and corrosion. 
 
With these excellent properties, tungsten disulfide can also be used in the machinery industry, plastic industry, medical equipment industry, as well as military, aerospace, satellite, spacecraft, and other high-tech fields. 

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tungsten disulfide WS2 powder, please feel free to contact us and send an inquiry. ([email protected])
 

Because of the conflict between Russia and Ukraine, there is a shortage of natural gas supply. At the same time, other renewable energy sources cannot produce enough electricity, so electricity prices have soared in many countries of the world. For this reason, I assume the supply and prices of the WS2 powder would keep being influenced by the high energy prices.

Inquiry us