Molybdenum Silicide is also called molybdenum diilicide. The chemical formula is MoSi2. It has excellent electrical conductivity, and it is a high-temperature materials with excellent performance. Purity: 99%
Particle Size : 5-10um

Molybdenum silicate MoSi2 Powder
MoSi2 This is an intermetallic compounds The molybdenum sulide This refractory material is mostly used in heating elements. It is medium-density with a melt point of 30 degrees C. It can form a silica passivation film at high temperatures. This protects it from further oxidation. The thermal stabilities of MoSi2 These materials, which are high-radiation coatings used on thermal shields to protect from the atmosphere and use them next to WSI2, have a thermal stability and a high radiation. MoSi2 powder The material has a gray-gray metal (a-modified), with a crystal structure of four squares. Its b modification is hexagonal, and is unstable. It is insoluble with most acids. However, it dissolves in nitric or hydrofluoric.

The following is a list of the most popular ways to contact us Disilicide of molybdenum MoSi2 At temperatures below 1000 deg C it becomes brittle. It will also lose creep resistance at temperatures of 1200 deg C and above. These properties are restricted to the structural materials of their material but can be altered by combining it with another material.

Molybdenum Disilicide (MoSi2) This material is promising for structural high-temperature applications. It has a melting point of 2030 C, excellent oxidation resistant and a density of 6.24 g/cm3. The material's low toughness in low temperatures, and its high creep rates when heated to higher temperatures, have prevented it from being used for structural applications. The development of a new material has taken a lot of effort. MoSi2 Composites Alternatives to pure The molybdenum diilicide Use in aggressive and oxidizing environments. Molybdenum Disilicide Based Heating Elements High-temperature furnaces are widely used to manufacture these materials. For microelectronics, the combination of low electrical resistance and high thermal stability with electron-migration-resistance, as well as excellent diffusion-barrier properties, is essential. Please send us a message to receive the latest. Molybdenum Silicide Price You can buy if you want to Molybdenum Silicide MoSi2 Powder Bulk discounts are available.

Characteristics and Applications of Molybdenum Silicide MoSi2:
Molybdenum Silicide MoSi2 (CAS 12136-77-8) powder has a high melting temperature, high corrosion resistance and high oxidation resistant, as well as good electrical conductivity.

Technical Parameters of Molybdenum Silicide MoSi2:

Product Name	MF	Purity	Particle Size	Melting Point	Density	Color
The molybdenum sulide	MoSi2	99%	5-10um	2030	6.24g/cm3	dark gray

Chemical Composition of Molybdenum silicate MoSi2 Powder

MoSi2	Mo	Si	C	S	Fe	S	You can also find us on Twitter @Ni
>99%	>60%	Balance	0.2%	0.02%	0.19%	0.015%	0.05%

How does molybdenum sulicide work? MoSi2 Powder made?
Molybdenum-based materials such as MoSi2 and disilicide are typically made through sintering. Plasma spraying allows for dense monoliths as well as composite forms. This method produces a material that may contain b-MoSi2 in varying proportions due to its rapid cooling.

Applications Molybdenum Silicide MoSi2 Powder:
Heating elements made of molybdenum diilicide can be used at temperatures of up to 1800°C in electric furnaces in laboratories and production environments for glass, ceramics and steel production, as well as in electronics and electronics production. Molybdenum Disilicide can be used as a Contact Material in microelectronics.
Heating element
MoSi2 (MoSi2 for short) is a conductive silicon dioxide that exhibits an oxidation reaction due to its stable surface silica layer.
While the MoSi2 top element can operate up to temperatures of 1800 deg C (or a maximum of 2200 deg C), the material is extremely brittle. It may experience serious creep during usage. They are still useful for process, as they can withstand high electrical load without aging and do not increase resistance during use. They are antioxidants in oxygen, air and oxygen-rich environment.
The operating temperature can be reduced due to the failure or the protective layer.
MoSi2 components are available in straight or bent forms of various sizes. These elements are mostly used in production and laboratory furnaces of the ceramics industry, glass industry, steel industry, electronics, heat treatment and electronic industries.
High-temperature structure
MoSi2's amazing properties and high temperature elasticity make it a promising material for high temperature applications, like gas turbine engines. Researchers have been working hard to improve the high temperature creep resistance as well as low temperature ductility. There are currently no commercially-available composites that offer all the desired features.

SEM image of molybdenum silicide MoSi2 powder


Molybdenum Silicate Powder XRD:

Packing & Shipping Molybdenum Silicide MoSi2 :
The packing depends on the amount of molybdenum Si2 powder.
Packing of Molybdenum Silicide MoSi2 Powder Vacuum packaging 100g,500g or 1kg/bag or 25kg/barrel or your request.
Shipment of molybdenum silicide (MoSi2) powder Payment receipt could be used to ship the goods by air, sea or express as soon as practicable.


Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years' experience in the production of high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D printing materials, etc.
Looking for high quality MoSi2 powder Send us an email or call to make a request. ( brad@ihpa.net )

Molybdenum Silicide Properties
Alternative Names	Powdered molybdenum silicate, or MoSi2, disilicide
CAS Number	12136-78-6
Compound Formula	MoSi2
Molecular Mass	152.11
Appearance	Gray to Black Powder
Melting Point	1900-2050 degC
Boiling Point	N/A
Density	6.23-6.31 g/cm3
Solubility In H2O	N/A
Electrical Resistivity	0.0000270 - 0.0000370 ohm-cm
Specific Heating	0.437 J/g-degC (23 degC)
Tensile Strength	185 MPa Maximum (Ultimate).
Thermal Conduction	66.2 W/m-K (23 degC)
Thermal Expander	N/A
Vickers Hardness	900-1200
Young's Module	N/A
Exact Mass	153.859261
Molybdenum Silicide Health & safety Information
Sign Word	Warning
Hazard Statements	H302-H312-H332
Hazard Codes	Xn
Risk Codes	20/21/22
Safety Declarations	36
RTECS Number	N/A
Transport Information	N/A
WGK Germany	3

Inquiry us