What is aluminium nitride (AlN)?Aluminum nitride (a covalent-bond compound) is an atomic-crystal belonging to a diamondlike nitride. It is non-toxic with a white or grayish-white color. Aluminum nitride formula AlN. Aluminum nitride, which is metal-treated, can replace tantalum oxide and alumina for many electronic instruments. Aluminum nitride may be produced by either reducing aluminum dioxide and carbon, or by directly nitriding aluminum.

Aluminum Nitride Ceramic Properties
Aluminum nitride has a high degree of purity, a small size particle and a high activity. This powder is used as a raw material to make a ceramic substrate that is highly thermally conductive. The aluminum nitride substrate is a large-scale heat sink substrate that has excellent thermal conductivity. It also features a low expansion coefficient, possesses high strength, and can withstand high temperatures and chemicals. Aluminum nitride ceramics have a hardness that is higher than traditional alumina. It's a new material for wear-resistant ceramics.

The aluminum nitride substrate is described below.
China has had a long tradition of developing substrates. Substrates have also been continually improved. Fiber substrates, FR-4 aluminum substrates, copper substrates and fiber substrates are traditional substrates.

The improvement of industrial requirements and the refinement of thermal expansion coefficients and heat dissipation limits, it is necessary to look for alternatives.

A ceramic substrate made of aluminum nitride using LAM technology is an ideal choice. This allows the metal to be bonded more tightly to the ceramic. The maximum is 45, Pa. This is the strength of a ceramic larger than one mm thick. The aluminum-nitride substrate is coated with a metal film that has a lower resistance and a higher resistance. It can also be customized in thickness between 1 mm and 1 mm.

Why is the aluminum-nitride ceramic substrate so much more expensive?
Comparing the thermal conductivity with a traditional ceramic substrate of 1 to 2W/mk, the aluminum-based substrat is superior. While the thermal conduction of copper itself is up to 383.8 W/mK the thermal conduction of the insulating layers is only around 1.0W/mK. This is much better. 1.8W/mK. The aluminum-nitride ceramic has a greater thermal conductivity. Its data ranges between 170 and 230 W/m.k.

The coefficient of thermal contraction (CTE) is one example. In LED lighting the thermal conductivity is typically 14-17ppm/C for the substrate, while the CTE for the silicon chip was 6ppm/C. PCBs will expand in extreme temperatures and drastic temperature changes. This can lead to desoldering problems. CTE is 4-5ppm/C for aluminum nitride, which is brighter than the expansion ratio and is closer to it.

Aluminum nitride ceramics substrate does not have organic components. Copper layer does not have an oxide layer. They are long-lasting, can be used under a reducing environment for a prolonged period of time and are suitable for aerospace equipment.

On the market, aluminum nitride-ceramic substrates are used widely. A low frequency loss, low dielectric constant and high density assembly (L) are possible due to their low dielectric constant and low frequency losses. /S The resolution can be as high as 20mm. It is very beneficial to have a small, thin, light, and short device in the current trend.

The ceramic substrates production market is located overseas. Due to the importance of independent research in the past few years and the growing demand for aluminum-nitride substrates on the domestic market, this technology has been given the top priority in the industry. Aluminum nitride is a ceramic substrate that has many advantages.

Tech Co., Ltd., a leading aluminum nitride producer, has over 12 years of experience in the chemical product development and research. Contact us if you need high-quality aluminum nitride. Send an inquiry .

Inquiry us